RIGHT:[[フリーソフトウェアのコンパイル]]
*isc-dhcpd の作成
Solaris8 07/03 + gcc な環境

**ソース
-dhcp-3.0pl2.tar.gz

**コンパイル,インストール
   % ./configure
   % make
   # make install
これで, /usr/sbin/ 以下に dhcpd など, 関係するコマンドがインストールされる.

起動ファイルのコピー
  # sed s/@PREFIX@/\\/usr/g contrib/solaris.init | \
    sed s/usr\\/etc\\/dhcpd.pid/etc\\/dhcpd.pid/g \
    > /etc/init.d/isc-dhcpd
  # chmod +x /etc/init.d/isc-dhcpd
  # ln -s ../init.d/isc-dhcpd /etc/rc2.d/S99isc-dhcpd
  # ln -s ../init.d/isc-dhcpd /etc/rc0.d/K01isc-dhcpd
  # vi /etc/init.d/isc-dhcpd
  ----------------------------------------------------
  # start) のところに以下のものを加えておく.
  if[ -f /etc/dhcpd.pid ]; then
      rm /etc/dhcpd.pid
  fi
  ----------------------------------------------------
//----------------------------------------------------
**設定
servers/dhcpd.conf にサンプルの設定ファイルがあるので,
これを利用する.
  # cp server/dhcpd.conf /etc
  # vi /etc/dhcpd.conf
  -------------------------------------------------------------
  # dhcpd.conf
  #
  # Sample configuration file for ISC dhcpd
  #
  
  # option definitions common to all supported networks...
  option domain-name "XXX.example.jp";
  option domain-name-servers 172.16.0.11;
  ddns-update-style none;
  
  default-lease-time 6000;
  max-lease-time 72000;
  
  # If this DHCP server is the official DHCP server for the local
  # network, the authoritative directive should be uncommented.
  #authoritative;
  
  # Use this to send dhcp log messages to a different log file (you also
  # have to hack syslog.conf to complete the redirection).
  log-facility local7;
  # This is a very basic subnet declaration.
  
  #
  # Authenticated VLAN
  #
  subnet 172.16.0.0 netmask 255.255.0.0 {
    range 172.16.1.1 172.16.1.253;
    option routers 172.16.0.10;
  #
    ddns-update-style interim;
    ddns-domainname "xxx.example.jp";
    ddns-rev-domainname "in-addr.arpa";
    zone xxx.example.jp. {
      primary 172.16.0.11;
    }
    zone 1.16.172.in-addr.arpa. {
      primary 172.16.0.11;
    }
  }
  
  #
  # Dafault VLAN
  #
  subnet 192.168.0.0 netmask 255.255.255.0 {
    default-lease-time 300;
    max-lease-time 300;
    range 192.168.0.100 192.168.0.199;
    option routers 192.168.0.1;
  }
  -------------------------------------------------------------
//-------------------------------------------------------------
**フェイルオーバの設定
tests/failover/ 内にフェイルオーバをする時の
設定ファイルのサンプルがある.

ます,現行の設定を共通の設定とするため,
  # mv /etc/dhcpd.conf /etc/dhcpd-master.conf
として,名前を変えておく.
そして,failover 用の設定も加えておく
  # dhcpd.conf
  #
  # Sample configuration file for ISC dhcpd
  #
  
  # option definitions common to all supported networks...
  option domain-name "XXX.example.jp";
  option domain-name-servers 172.16.0.11;
  ddns-update-style none;
  
  default-lease-time 6000;
  max-lease-time 72000;
  
  # If this DHCP server is the official DHCP server for the local
  # network, the authoritative directive should be uncommented.
  #authoritative;
  
  # Use this to send dhcp log messages to a different log file (you also
  # have to hack syslog.conf to complete the redirection).
  log-facility local7;
  
  # This is a very basic subnet declaration.
  
  #
  # Authenticated VLAN
  #
  subnet 172.16.0.0 netmask 255.255.0.0 {
    pool{                                    # <--このあたり
      deny dynamic bootp clients;            # <--このあたり
      range 172.16.1.1 172.16.1.253;
      option routers 172.16.0.10;
      failover peer "test";                  # <--このあたり
    }                                        # <--このあたり
  }
  
  #
  # Dafault VLAN
  #
  subnet 192.168.0.0 netmask 255.255.0.0 {
    pool{                                    # <--このあたり
      deny dynamic bootp clients;            # <--このあたり
      default-lease-time 300;
      max-lease-time 300;
      range 192.168.0.100 192.168.0.199;
      option routers 192.168.0.1;
      failover peer "test";                  # <--このあたり
    }                                        # <--このあたり
  }

これを,お互いのサーバにコピーし,設定ファイル中で
読み込んで使う.

プライマリサーバ側の設定ファイル
  # dhcpd.conf for primary
  #
  authoritative;
  failover peer "test" {
    primary;
    address 172.16.0.12;
    port 10001;
    peer address 172.16.0.22;
    peer port 10001;
    max-response-delay 60;
    max-unacked-updates 10;
    mclt 3600;
    hba ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:ff:
      00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00;
    load balance max seconds 3;
  }
  
  include "/etc/dhcpd-master.conf";

セカンダリサーバ側の設定ファイル
  # dhcpd.conf for primary
  #
  authoritative;
  failover peer "test" {
    #primary;
    secondary;
    address 172.16.0.22;
    port 10001;
    peer address 172.16.0.12;
    peer port 10001;
    max-response-delay 60;
    max-unacked-updates 10;
  }
  
  include "/etc/dhcpd-master.conf";

**起動
一番最初に起動する前には
  # touch /etc/dhcpd.leases
をしておくこと.

トップ   編集 差分 履歴 添付 複製 名前変更 リロード   新規 一覧 検索 最終更新   ヘルプ   最終更新のRSS