![[PukiWiki]](image/alfa.png "[PukiWiki]")
#author("2019-11-15T10:51:05+09:00","default:tanak0to","tanak0to") #author("2019-11-19T12:04:09+09:00","default:tanak0to","tanak0to") RIGHT:[[覚え書き]] 使用機種: 6125G/XG Blade Switch *基本設定 [#efcfe226] システムモードへ <6125G/XG Blade Switch>system-view System View: return to User View with Ctrl+Z. Web インタフェイス，ssh 有効 [6125G/XG Blade Switch]ip http enable [6125G/XG Blade Switch]ssh server enable Info: Enable SSH server. 管理者ユーザ設定 [6125G/XG Blade Switch]local-user admin New local user added. [6125G/XG Blade Switch-luser-admin]password cipher hogehoge [6125G/XG Blade Switch-luser-admin]service-type ssh [6125G/XG Blade Switch-luser-admin]service-type web [6125G/XG Blade Switch-luser-admin]authorization-attribute level 3 [6125G/XG Blade Switch-luser-admin]quit [6125G/XG Blade Switch]user-interface vty 0 4 [6125G/XG Blade Switch-ui-vty0-4]authentication-mode scheme [6125G/XG Blade Switch-ui-vty0-4]protocol inbound ssh [6125G/XG Blade Switch-ui-vty0-4]quit 設定保存 [6125G/XG Blade Switch]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/config.cfg] (To leave the existing filename unchanged, press the enter key): Validating file. Please wait.... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully. *その他設定 [#jbf1fe37] スイッチ名設定 [6125G/XG Blade Switch]sysname HOGEHOGE 時刻設定 [6125G/XG Blade Switch]clock timezone Osaka add 09:00:00 NTP サーバ設定 [6125G/XG Blade Switch]ntp-service unicast-server 192.168.1.110 ------------------------------------ *IRF 設定 [#o05a6540] +1号機 <6125G/XG Blade Switch>system-view System View: return to User View with Ctrl+Z. [6125G/XG Blade Switch]irf member 1 priority 32 [6125G/XG Blade Switch]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/config.cfg] (To leave the existing filename unchanged, press the enter key): flash:/config.cfg exists, overwrite? [Y/N]:y Validating file. Please wait.... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully. [6125G/XG Blade Switch]quit <6125G/XG Blade Switch>reboot Start to check configuration with next startup configuration file, please wait.........DONE! This command will reboot the device. Continue? [Y/N]:y (2) 2号機 <6125G/XG Blade Switch>system-view System View: return to User View with Ctrl+Z. [6125G/XG Blade Switch]irf member 1 renumber 2 Warning: Renumbering the switch number may result in configuration change or loss. Continue?[Y/N]y [6125G/XG Blade Switch]quit <6125G/XG Blade Switch>reboot Start to check configuration with next startup configuration file, please wait.........DONE! This command will reboot the device. Continue? [Y/N]:y (3) 1号機 <6125G/XG Blade Switch>system-view System View: return to User View with Ctrl+Z. [6125G/XG Blade Switch]interface Ten-GigabitEthernet 1/0/17 [6125G/XG Blade Switch-Ten-GigabitEthernet1/0/17]shutdown Interface Ten-GigabitEthernet1/0/17 has already been shut down [6125G/XG Blade Switch-Ten-GigabitEthernet1/0/17]quit (4) 2号機 <6125G/XG Blade Switch>system-view System View: return to User View with Ctrl+Z. [6125G/XG Blade Switch]interface Ten-GigabitEthernet 2/0/17 [6125G/XG Blade Switch-Ten-GigabitEthernet2/0/17]shutdown [6125G/XG Blade Switch-Ten-GigabitEthernet2/0/17]quit (5) 1号機 [6125G/XG Blade Switch]irf-port 1/1 [6125G/XG Blade Switch-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/17 Info: You are recommended to save the configuration after completing your IRF configuration; otherwise, it may be lost after system reboot. [6125G/XG Blade Switch-irf-port1/1] (6) 2号機 [6125G/XG Blade Switch]irf-port 2/2 [6125G/XG Blade Switch-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/17 Info: You are recommended to save the configuration after completing your IRF configuration; otherwise, it may be lost after system reboot. [6125G/XG Blade Switch-irf-port2/2]quit [6125G/XG Blade Switch-irf-port2/2]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/config.cfg] (To leave the existing filename unchanged, press the enter key): flash:/config.cfg exists, overwrite? [Y/N]:y Validating file. Please wait.... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully. (7) 1号機 [6125G/XG Blade Switch]interface Ten-GigabitEthernet 1/0/17 [6125G/XG Blade Switch-Ten-GigabitEthernet1/0/17]undo shutdown [6125G/XG Blade Switch-Ten-GigabitEthernet1/0/17]quit [6125G/XG Blade Switch]irf-port-configuration active [6125G/XG Blade Switch]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/config.cfg] (To leave the existing filename unchanged, press the enter key): flash:/config.cfg exists, overwrite? [Y/N]:y Validating file. Please wait.... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully. (8)2号機 [6125G/XG Blade Switch]interface Ten-GigabitEthernet2/0/17 [6125G/XG Blade Switch-Ten-GigabitEthernet2/0/17]undo shutdown [6125G/XG Blade Switch-Ten-GigabitEthernet2/0/17]quit [6125G/XG Blade Switch]irf-port-configuration active [6125G/XG Blade Switch]save The current configuration will be written to the device. Are you sure? [Y/N]:y Please input the file name(*.cfg)[flash:/config.cfg] (To leave the existing filename unchanged, press the enter key): flash:/config.cfg exists, overwrite? [Y/N]:y Validating file. Please wait.... The current configuration is saved to the active main board successfully. Configuration is saved to device successfully. 自動的に再起動がかかる? (9)1号機(IRF が成功していたら 2号にはつながんない) <6125G/XG Blade Switch>display irf Switch Role Priority CPU-Mac Description *+1 Master 32 5c8a-382d-XXXX ----- 2 Slave 1 5c8a-384f-YYYY ----- -------------------------------------------------- * indicates the device is the master. + indicates the device through which the user logs in. The Bridge MAC of the IRF is: 5c8a-382d-XXXX Auto upgrade : yes Mac persistent : 6 min Domain ID : 0 ---------------------------------- *リンクアグリゲーション [#k135bd93] <6125G/XG>system-view System View: return to User View with Ctrl+Z. [6125G/XG]interface Bridge-Aggregation 1 [6125G/XG-Bridge-Aggregation1]link-aggregation mode dynamic [6125G/XG-Bridge-Aggregation1]quit [6125G/XG]interface GigabitEthernet 1/1/5 [6125G/XG-GigabitEthernet1/1/5]port link-aggregation group 1 [6125G/XG-GigabitEthernet1/1/5]interface GigabitEthernet 1/1/6 [6125G/XG-GigabitEthernet1/1/6]port link-aggregation group 1 [6125G/XG]interface GigabitEthernet 2/1/5 [6125G/XG-GigabitEthernet2/1/5]port link-aggregation group 1 [6125G/XG-GigabitEthernet2/1/5]interface GigabitEthernet 2/1/6 [6125G/XG-GigabitEthernet2/1/6]port link-aggregation group 1 [6125G/XG]interface Bridge-Aggregation 3 [6125G/XG-Bridge-Aggregation3]link-aggregation mode dynamic [6125G/XG-Bridge-Aggregation3]quit [6125G/XG]interface GigabitEthernet 1/1/7 [6125G/XG-GigabitEthernet1/1/7]port link-aggregation group 3 [6125G/XG-GigabitEthernet1/1/7]interface GigabitEthernet 2/1/7 [6125G/XG-GigabitEthernet2/1/7]port link-aggregation group 3 [6125G/XG]interface Bridge-Aggregation 4 [6125G/XG-Bridge-Aggregation4]link-aggregation mode dynamic [6125G/XG-Bridge-Aggregation4]quit [6125G/XG]interface GigabitEthernet 1/1/8 [6125G/XG-GigabitEthernet1/1/8]port link-aggregation group 4 [6125G/XG-GigabitEthernet1/1/8]interface GigabitEthernet 2/1/8 [6125G/XG-GigabitEthernet2/1/8]port link-aggregation group 4 --------------------------- *VLAN 作成 [#z17b2b1b] [6125G/XG]vlan 1010 [6125G/XG-vlan1010]quit [6125G/XG]interface GigabitEthernet 1/0/9 [6125G/XG-GigabitEthernet1/0/9]port access vlan 1010 [6125G/XG-GigabitEthernet1/0/9]interface GigabitEthernet 1/0/10 [6125G/XG-GigabitEthernet1/0/10]port access vlan 1010 [6125G/XG-GigabitEthernet1/0/10]interface GigabitEthernet 1/0/11 [6125G/XG-GigabitEthernet1/0/11]port access vlan 1010 [6125G/XG-GigabitEthernet2/0/11]interface GigabitEthernet 2/0/10 [6125G/XG-GigabitEthernet2/0/10] port access vlan 1010 [6125G/XG-GigabitEthernet2/0/10]interface GigabitEthernet 2/0/9 [6125G/XG-GigabitEthernet2/0/9] port access vlan 1010 [6125G/XG]interface Bridge-Aggregation 3 [6125G/XG-Bridge-Aggregation3]port access vlan 1010 [6125G/XG-Bridge-Aggregation3]interface Bridge-Aggregation 4 [6125G/XG-Bridge-Aggregation4]port access vlan 1010 確認 [6125G/XG]dis vlan all VLAN ID: 1 VLAN Type: static Route Interface: not configured Description: VLAN 0001 Name: VLAN 0001 Tagged Ports: none Untagged Ports: Bridge-Aggregation1 Bridge-Aggregation2 GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3 GigabitEthernet1/0/4 GigabitEthernet1/0/5 GigabitEthernet1/0/6 GigabitEthernet1/0/7 GigabitEthernet1/0/8 GigabitEthernet1/0/12 GigabitEthernet1/0/13 GigabitEthernet1/0/14 GigabitEthernet1/0/15 GigabitEthernet1/0/16 GigabitEthernet1/1/5 GigabitEthernet1/1/6 GigabitEthernet2/0/1 GigabitEthernet2/0/2 GigabitEthernet2/0/3 GigabitEthernet2/0/4 GigabitEthernet2/0/5 GigabitEthernet2/0/6 GigabitEthernet2/0/7 GigabitEthernet2/0/8 GigabitEthernet2/0/11 GigabitEthernet2/0/12 GigabitEthernet2/0/13 GigabitEthernet2/0/14 GigabitEthernet2/0/15 GigabitEthernet2/0/16 GigabitEthernet2/1/5 GigabitEthernet2/1/6 Ten-GigabitEthernet1/1/1 Ten-GigabitEthernet1/1/2 Ten-GigabitEthernet1/1/3 Ten-GigabitEthernet1/1/4 Ten-GigabitEthernet2/1/1 Ten-GigabitEthernet2/1/2 Ten-GigabitEthernet2/1/3 Ten-GigabitEthernet2/1/4 VLAN ID: 1010 VLAN Type: static Route Interface: not configured Description: VLAN 1010 Name: VLAN 1010 Tagged Ports: none Untagged Ports: Bridge-Aggregation3 Bridge-Aggregation4 GigabitEthernet1/0/9 GigabitEthernet1/0/10 GigabitEthernet1/0/11 GigabitEthernet1/1/7 GigabitEthernet1/1/8 GigabitEthernet2/0/9 GigabitEthernet2/0/10 GigabitEthernet2/1/7 GigabitEthernet2/1/8 **VLAN Trunk ポートの作成 [#i7ec0d6b] [6125G/XG]interface GigabitEthernet 1/0/24 [6125G/XG-GigabitEthernet1/0/24]port linktype trunk [6125G/XG-GigabitEthernet1/0/24]port trunk permit all --------------------------- *設定初期化(未確認) [#x6e2529d] 方法 1 restore factory-default 方法2 reset saved-configuration [ backup | main ] 方法3 スイッチを再起動． 起動中に Ctrl + B を 5秒間(?)押す． パスワードを入れる 「5 restore factory configuration」を選択
